Industrial Products

• Adhesive, semi-fluid grease
• For all types of open gears lubricated by centralized system
• Provides good pumpability without the use of harmful solvents

• Safe for applications where direct contact with food is possible
• Formulated from pure USP white mineral oil

• Outstanding dark pipe threading oil    
• Provides optimum results

• Higher film strength than traditional lubricants    
• Protects against corrosion    
• Fully compatible with most compressor components

• Outstanding Anti-Wear Protection    
• High aniline points for controlled seal-swelling characteristics    
• Rust and corrosion resistant properties

• Outstanding Anti-Wear Protection    
• High aniline points for controlled seal-swelling characteristics    
• Rust and corrosion resistant properties

• Outstanding Anti-Wear Protection    
• High aniline points for controlled seal-swelling characteristics    
• Rust and corrosion resistant properties

• Outstanding Anti-Wear Protection    
• High aniline points for controlled seal-swelling characteristics    
• Rust and corrosion resistant properties

• Outstanding Anti-Wear Protection    
• High aniline points for controlled seal-swelling characteristics    
• Rust and corrosion resistant properties

• Outstanding Anti-Wear Protection    
• High aniline points for controlled seal-swelling characteristics    
• Rust and corrosion resistant properties

• Low Torque start-up capability    
• Corrosion and oxidation resistant    
• Long lasting film strength over a wide temperature range

• Prevents formation of gum    
• Provides superior lubrication

• High viscosity index    
• Excellent film strength    
• High aniline point, great seal compatibility

• High viscosity index    
• Excellent film strength    
• High aniline point, great seal compatibility

• High viscosity index    
• Excellent film strength    
• High aniline point, great seal compatibility

• High viscosity index    
• Excellent film strength    
• High aniline point, great seal compatibility

• High viscosity index    
• Excellent film strength    
• High aniline point, great seal compatibility

• Ideal for heavy-duty transmissions    
• High aniline point, great seal compatibility    
• Meets API GL-5 and MT-1

• High viscosity index    
• Excellent film strength    
• High aniline point, great seal compatibility

• Excellent for all slow to medium bearings
• Exceptional high shear stability, water resistance and load-carrying properties
• Designed and developed to meet the US EPA 2013 Vessel General Permit (VGP) requirements.

• Moisture displacement    
• Rust Preventive Coating    
• Excellent “wet start” product

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals
• Able to flow in very cold ambient temperature applications
• Ultra-clean Fluid. Typical ISO Cleanliness:15/13/9

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals
• Able to flow in very cold ambient temperature applications
• Ultra-clean Fluid. Typical ISO Cleanliness:15/13/9

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals

• Excellent for all slow to medium bearings
• Exceptional high shear stability, water resistance and load-carrying properties
• Designed and developed to meet the US EPA 2013 Vessel General Permit (VGP) requirements.

• Environmentally responsible    
• Anti-wear, anti-rust    
• Ultimately biodegradable

• Environmentally responsible    
• Anti-wear, anti-rust    
• Ultimately biodegradable

• Environmentally responsible    
• Anti-wear, anti-rust    
• Ultimately biodegradable

• Ultimately biodegradable penetrating fluid   
• Excellent moisture displacement properties for 'Wet Start' applications
• Metal surface protection

• Ultimately biodegradable
• Synthetic-long life, SAE-90 gear fluid
• Fortified with extreme pressure and anti-wear additives

• Clean, long-lasting operation    
• Excellent anti-wear performance    
• Biodegradability

• Clean, long-lasting operation    
• Excellent anti-wear performance    
• Biodegradability

• Clean, long-lasting operation    
• Excellent anti-wear performance    
• Biodegradability

• Penetrates and lubricates    
• Prevents rusting    
• Acts as a cleansing agent

• Penetrates and lubricates    
• Prevents rusting    
• Acts as a cleansing agent

• Heavy-duty, tacky    
• Penetrates and lubricates    
• Prevents rust and corrosion

• NSF H1 Registered    
• Water-Resistant    
• Contains anti-microbial additive

• NSF H1 Registered    
• Water-Resistant    
• Contains anti-microbial additive

• NSF H1 Registered    
• Superior protection from rust and corrosion    
• Excellent resistance to water washout and spray off

• Non-corrosive    
• Non-staining    
• Recommended for all types of machining operations

• Superior wear prevention    
• Extensive oxidation stability    
• All season protection

• Exceptional oxidation resistance for extended operating life    
• Low Torque start-up capabilities especially in cold weather conditions    
• Excellent metal, rubber and plastic compatibility

• Extremely shear stable for extended regreasing intervals    
• Combination of anti-wear and polymer offer extra lubricity thereby reducing heat, frictional drag & power consumption
• Excellent compatibility with seals, gaskets & plastics

• Extremely shear stable for extended regreasing intervals    
• Combination of anti-wear and polymer offer extra lubricity thereby reducing heat, frictional drag & power consumption
• Excellent compatibility with seals, gaskets & plastics

• NSF 3H & H1 Registered Food Grade
• Meets U.S. FDA Regulation CFR 172.878
• Approved for Direct & Incidental Food Contact
• Non-Toxic, Odorless and Tasteless
• Allergen Free
• Provides Corrosion Protection

• Superior Anti-Wear Protection increases chain pin and bushing life
• Adhesiveness reduces drippage allowing for the potential extension of relubrication intervals which reduces usage,as well as this unique waterproof tacky product provides increased protection from water and chemical corrosion on all metal surfaces
• Rust and Corrosion Inhibitors enhance the resistance of the chain components to the effects of water and chemical exposure
• NSF H1 Food Grade Registered
• Kosher and other certifications

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• Anti-wear additive package
• High aniline point prolongs seal life
• Designed to meet Cincinnati Milacron and Vickers specs

• Anti-wear additive package
• High aniline point prolongs seal life
• Designed to meet Cincinnati Milacron and Vickers specs

• Anti-wear additive package
• High aniline point prolongs seal life
• Designed to meet Cincinnati Milacron and Vickers specs

• Heavy-duty    
• Has been used very successfully on internal as well as external broaching

• NSF H1 Registered    
• USP White Mineral-Oil Based Food Grade Grease    
• Exceptional anti-wear properties

• NSF H1 Registered    
• USP White Mineral-Oil Based Food Grade Grease    
• Exceptional anti-wear properties

• NSF H1 Registered    
• USP White Mineral-Oil Based Food Grade Grease    
• Exceptional anti-wear properties

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• NSF H1 and 3H Registered    
• Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
• Made from the highest quality USP mineral oils

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• NSF H1 and 3H Registered 
• Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible   
• Made from the highest quality USP mineral oils

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• NSF H1 and 3H Registered    
• Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
• Made from the highest quality USP mineral oils

• NSF H1 and 3H Registered    
• Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
• Made from the highest quality USP mineral oils

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• NSF H1 and 3H Registered    
• Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
• Made from the highest quality USP mineral oils

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• Fortified with maximum strength antioxidant    
• Thermally and oxidatively stable    
• Zinc-free

• USP Mineral Oil-Based Food Grade Oil
• Corrosion Resistant
• Reduces oxidation and sludge

• Ideally suited for proofer chains
• Water and steam resistant
• Clear, thick and tacky

• Ideally suited for proofer chains
• Water and steam resistant
• Clear, thick and tacky

• NSF H1 Registered    
• Clean, safe, non-toxic lubrication    
• Water and steam resistant

• Waterproof, corrosion resistant    
• Strong adhesive and stay-put properties    
• Solid fillers for extra wear protection under heavy load

• Waterproof, corrosion resistant    
• Strong adhesive and stay-put properties    
• Solid fillers for extra wear protection under heavy load

• Waterproof, corrosion resistant    
• Strong adhesive and stay-put properties    
• Solid fillers for extra wear protection under heavy load

• Waterproof, corrosion resistant    
• Strong adhesive and stay-put properties    
• Solid fillers for extra wear protection under heavy load

• Contains 20% Silicone
• NSF H1 Registered    
• Wide operating temperature range    
• Water resistance

• Protects against rust and bearing corrosion    
• Good resistance to foaming and aeration    
• Protects against sludge and varnish formation

• Protects against rust and bearing corrosion    
• Good resistance to foaming and aeration    
• Protects against sludge and varnish formation

• Protects against rust and bearing corrosion    
• Good resistance to foaming and aeration    
• Protects against sludge and varnish formation

• Resists breakdown under high temperatures    
• Maintains oil pressure under heavy load conditions    
• Minimizes rust and corrosion

• Excellent oil-bleed resistance    
• Exceptional anti-wear properties    
• Highly oxidation resistant

• Very chemical resistant    
• Rust & corrosion resistant    
• High anti-wear film protection

• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics    
• Foam Suppression Properties

• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics    
• Foam Suppression Properties

• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics    
• Foam Suppression Properties

• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics    
• Foam Suppression Properties

• Fluid Zinc for anti-wear properties    
• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics

• High performance anti-wear properties    
• Oxidation and thermal stability    
• Excellent filterability in fine filtration systems

• Fluid Zinc for anti-wear properties    
• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics

• High performance anti-wear properties    
• Oxidation and thermal stability    
• Excellent filterability in fine filtration systems

• Fluid Zinc for anti-wear properties    
• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics

• Fluid Zinc for anti-wear properties    
• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics

• High performance anti-wear properties    
• Oxidation and thermal stability    
• Excellent filterability in fine filtration systems

• Eliminates carbon build-up on chains    
• Does not contain harmful VOC’s which pollute the atmosphere    
• Advanced ester chemistry reduces friction, wear and energy costs

• Eliminates carbon build-up on chains    
• Does not contain harmful VOC’s which pollute the atmosphere    
• Advanced ester chemistry reduces friction, wear and energy costs

• Excellent thermal stability and low volatility providing longer service life
• 600°F(316°C) maximum operating temperature
• 650°F(343°C) maximum film temperature
• Low viscosity and pour point for easy start up
• NSF H1, HT1 Food Grade Registered
• Environmentally friendly, non-toxic/non-hazardous

• Fluid Zinc for anti-wear properties    
• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics

• Removes varnish and carbon deposits, which greatly improves efficiency and life expectancy    
• Compatible with petroleum base oils    
• Provides excellent solubility, solvency and cleaning capabilities

• Strongly adhesive    
• Fortified with extreme pressure additives

• Strongly adhesive    
• Fortified with extreme pressure additives

• Excellent cold operating characteristics    
• Anti-wear protection    
• Extremely water-resistant

• Tacky, adhesive    
• Water-resistant    
• Red in color

• Polymer shear stable    
• High film strength, low torque    
• Prevents wear, rust and corrosion

• Polymer shear stable    
• High film strength, low torque    
• Prevents wear, rust and corrosion

• Moisture displacement    
• Rust Preventive Coating    
• Excellent “wet start” product

• Environmentally safe    
• Easily recyclable    
• Inherently biodegradable

• Non-toxic to aquatic life per U.S. EPA LC50  
• Zinc-free anti-wear additive system   
• Inherently biodegradable

• Environmentally safe    
• Easily recyclable    
• Inherently biodegradable

• Environmentally safe    
• Easily recyclable    
• Inherently biodegradable

• GC-LB certified
• Lithium Complex thickeners provide high dropping point (500+F)
• Stays in place
• EP & Anti-wear properties
• Excellent shear stability
• Enhanced water and oxidation resistance

• Does not contain Fluorocarbons    
• Does not contain 1,1,1 Trichloroethane

• Fluid Zinc for anti-wear properties    
• Extreme high viscosity index for excellent fluidity at extreme cold temperatures    
• -70°F to -80°F pour point

• Primary friction barrier lubricant    
• Non-corrosive    
• High water resistance

• Protects against Wear
• Releases Stuck Parts
• Prevents Rust
• Displaces Moisture

• Multi-purpose grease    
• Non-corrosive

• Provides improved thermal stability    
• Hydrolytic stability    
• Anti-wear high pressure protection

• 5W oil for extremely high speed applications
• Superior protective coating of metals
• Exceptional lubricity

• 10W oil for high speed spindles, grinders
• Superior protective coating of metals
• Exceptional lubricity

• Engine rust prevention    
• Water resistant

• Prevents “dry start”, scuffing, scoring, and friction
• Protects freshly machined engine parts
• Zinc-oxide anti-wear additive

• Exceptional film strength    
• Excellent shear stability at high temperatures    
• Highly water proof

• Excellent extreme pressure anti-wear protection    
• Extremely shear-stable for longer effective periods of lubrication    
• Outstanding water resistance

• Excellent extreme pressure anti-wear protection    
• Extremely shear-stable for longer effective periods of lubrication    
• Outstanding water resistance

• Excellent extreme pressure anti-wear protection    
• Extremely shear-stable for longer effective periods of lubrication    
• Outstanding water resistance

• Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
• Used in centralized lubrication systems and new on-highway trailer wheel bearings    

• Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
• For heavy load, tight tolerances    
• Automatic dispensing systems

• Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
• Tacky, adhesive    
• Water-resistant

• Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
• Tacky, adhesive    
• Water-resistant

• 20W for light general oil applications
• Superior protective coating of metals
• Exceptional lubricity

• Molybdenum Disulfide extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
• Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
• Polymer adds to higher shear stability and longer lubricant life

• Molybdenum Disulfide extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
• Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
• Polymer adds to higher shear stability and longer lubricant life

• Operator Friendly    
• Sulfur and Chlorine Free    
• Low Foaming

• Specially designed for way lubrication
• Superior protective coating of metals
• Exceptional lubricity

• SAE 90 gear oil for medium to medium slow speed heavy-duty bearings    
• Exceptional film strength    
• Rust and corrosion protection

• Semi-fluid, water-repellent grease    
• Excellent for automatic lubrications systems    
• Excellent cold test characteristics

• Water resistant    
• High anti-wear for extra lubricity    
• Oxidation inhibited

• Water resistant    
• High anti-wear for extra lubricity    
• Oxidation inhibited

• Water resistant    
• High anti-wear for extra lubricity    
• Oxidation inhibited

• Water resistant    
• High anti-wear for extra lubricity    
• Oxidation inhibited

• Reversibility after high-heat, high shear conditions    
• Excellent sealing capabilities    
• Chemical resistant

• Reversibility after high-heat, high shear conditions    
• Excellent sealing capabilities    
• Chemical resistant

• Reversibility after high-heat, high shear conditions    
• Excellent sealing capabilities    
• Chemical resistant

• Reduces oxidation and sludge    
• Corrosion resistant

• Zinc-free formulation    
• Reduces oxidation and sludge

• SAE 140 gear oil for slow speed, worm gear applications    
• Exceptional film strength    
• Rust and corrosion protection

• High film strength    
• Exceptional resistance to water    
• Non-melt type

• High film strength    
• Exceptional resistance to water    
• Non-melt type

• High film strength    
• Exceptional resistance to water    
• Non-melt type

• High film strength    
• Exceptional resistance to water    
• Non-melt type

• High Viscosity Index    
• High Flash and Fire Points    
• Extra Clean Motor Oils

• High Viscosity Index    
• High Flash and Fire Points    
• Extra Clean Motor Oils

• High Viscosity Index    
• High Flash and Fire Points    
• Extra Clean Motor Oils

• High Viscosity Index    
• High Flash and Fire Points    
• Extra Clean Motor Oils

• High Viscosity Index    
• High Flash and Fire Points    
• Extra Clean Motor Oils

• Moisture displacement
• Great for wet start applications
• Great for general household use on hinges, locks, latches

• Contains 10% Graphite
• High Lubricity    
• Excellent Penetration    
• Effectiveness at High Temperatures

• NSF H1 and 3H Registered
• Acceptable as a release agent on grills, ovens and other food processing equipment where contact is possible

• High Viscosity Base Fluid
• Tacky/Adhesive
• Resistance to the Effects of Steam/Corrosion
• High Temperature Capability
• Excellent Oil Bleed Resistance
• Excellent Anti-Wear and Load Carrying Ability

• Quick installation / tamper proof
• Simple exchange / no special tools required
• Inexpensive automatic single-point lubrication

• Ready-to-use system / no assembly necessary
• Quick and easy activation with dial
• Discharge 1-12 months / in monthly steps = more flexibility 
• For use in hot and cold environments
• Year-round use for outdoor applications

• Quick installation / tamper proof
• Simple exchange / no special tools required
• Inexpensive automatic single-point lubrication
• Can be filled with up to NLGI #2 grease or oil

• Reusable NOVA Control unit
• Temperature independent during the entire discharge period
• Accelerated pressure built-up for first discharge within one day
• Simple handling / easy adjustments
• Ideal for applications with considerable temperature variations

• Easy configuration of discharge period and outlets
• Display of remaining volume and active outlets
• Status control on display
• Easy to set and change at any time
• Supply of 1 to 6 lubrication points with same lubricant amount

• Quick and easy control of settings and remaining impulses / operating hours until LC exchange
• More flexibility with simple programming of TIME or IMPULSE mode; settings can be changed at any time
• PIN prevents manipulation
• Reliable, precise lubricant discharge independent of temperature and counter pressure

• Simple and self-explanatory operation
• Precise settings, based on manufacturer recommendations, prevent lubricant starvation and save lubricant
• Settings can be changed at any time
• System can be turned off for extended equipment shut downs

• Bluetooth functionality as standard
• Configure, control and maintain remotely
• Increase of workplace safety
• Real-time lubricator function and feedback
• High pressure capability benefits, e.g. applications on gravity take-ups or where long remote grease lines are necessary
• Universal use both in cold areas and at higher temperature
• Wide remote installation options to improve workplace safety by installing the systems at safe and easy-to-access locations
• Straight forward, single-button operation
• Precise settings according to requirements prevent lubrication starvation and over-lubrication
• Various dispensing rate options - extended maintenance intervals

• Outstanding protection against micropitting, abrasion and wear    
• Unsurpassed extreme pressure and anti-wear performance    
• Outstanding thermal stability

• Outstanding protection against micropitting, abrasion and wear    
• Unsurpassed extreme pressure and anti-wear performance    
• Outstanding thermal stability

• Outstanding protection against micropitting, abrasion and wear    
• Unsurpassed extreme pressure and anti-wear performance    
• Outstanding thermal stability

• Outstanding protection against micropitting, abrasion and wear    
• Unsurpassed extreme pressure and anti-wear performance    
• Outstanding thermal stability

• Outstanding protection against micropitting, abrasion and wear    
• Unsurpassed extreme pressure and anti-wear performance    
• Outstanding thermal stability

• Excellent thermal stability    
• High wear reduction    
• Superior performance under demanding conditions

• Excellent thermal stability    
• High wear reduction    
• Superior performance under demanding conditions

• Excellent thermal stability    
• High wear reduction    
• Superior performance under demanding conditions

• Excellent thermal stability    
• High wear reduction    
• Superior performance under demanding conditions

• Excellent thermal stability    
• High wear reduction    
• Superior performance under demanding conditions

• NSF H1 Registered    
• Specially suited for water conditions

• Polyurea greases recommended by Electric Motor Bearing OEMs
• Distinctive "blue" color
• Compatible with competitive polyurea greases
• Outstanding shear stability - stays put, lasts longer, reduces relubrication intervals

• Greatly extends shaft and bushing life
• Extreme pressure

• Excellent cleaning capabilities    
• Used with existing lubricant    
• Superior flushing 

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• NSF H1 Registered    
• Excellent resistance to water washout    
• Contains anti-microbial

• Extended Drain Intervals    
• Excellent Chemical and Thermal Stability    
• Minimizes formation of Harmful Varnish, Gum and Sludge Deposits

• Minimizes formation of harmful varnish, gum and sludge deposits
• Will not 'wax out'

• Extended Drain Intervals    
• Excellent Chemical and Thermal Stability    
• Minimizes Formation of Harmful Varnish, Gum and Sludge Deposits

• High Temperature Lithium Complex Thickener
• Contains XTREMITY AW/EP Additive System
• Prevents Wear, Rust, and Corrosion on Robotic Gears & Bearings Operating in Normal to Severe Loading and Temperature Conditions
• Excellent Flow Across a Wide Operating Temperature Range and Reducer Shaft Speeds
• Shear Stable & Excellent Oxidation Resistance Providing Long Service Life

• Extreme pressure    
• Non-fogging    
• Eliminates gumming

• Extreme pressure    
• Non-fogging    
• Eliminates gumming

• Reduces carbon build-up on chains
• No harmful VOC’s which pollute the atmosphere
• Advanced unique chemistry reduces friction, wear and energy costs
• High auto-ignition temperature to reduce the risk of oven fires
• Superior film strength reduces oil consumption and reduces smoke

• Reduces carbon build-up on chains
• No harmful VOC’s which pollute the atmosphere
• Advanced unique chemistry reduces friction, wear and energy costs
• High auto-ignition temperature to reduce the risk of oven fires
• Superior film strength reduces oil consumption and reducessmoke

• Reduces carbon build-up on chains
• No harmful VOC’s which pollute the atmosphere
• Advanced unique chemistry reduces friction, wear and energy costs
• High auto-ignition temperature to reduce the risk of oven fires
• Superior film strength reduces oil consumption and reducessmoke

• Compounded with anti-wear additives    
• Rust and oxidation inhibitors

• Compounded with anti-wear additives    
• Rust and oxidation inhibitors

• Compounded with anti-wear additives    
• Rust and oxidation inhibitors

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

• Excellent thermal stability resulting in longer service life    
• Superior oxidation resistance    
• Outstanding anti-wear properties providing extended equipment life

***Use promo code SHOTSHOW for a 5% discount***
(Blister pack for retail sales only)

• Wide operating temperature range
  • FMO Gun Oil:  -5°F to 430°F
  • SFL Gun Grease:  -50°F to 350°F
• Lubricating film remains after being wiped away
• Fortified with extreme pressure/anti-wear additives to protect moving parts
• Provides high boundary lubrication film protection
• Includes oxidation inhibitors to prevent gumming
• Anti-corrosion additives to protect metal surfaces from rust and corrosion
• High resistance to moisture, acids, and alkalis
• Resists water wash-off
• Non-toxic/pet safe
• Non-staining
• Does not contain chlorinated solvents or silicone
• Provides smooth operation reducing misfires and jamming
• Extends gun life
• Made in the U.S. by Lubriplate, a premier specialty lubricant manufacturer with over 150 years of experience and expertise in the field

• NSF H1 Registered    
• Excellent low temperature pumpability    
• Wide operating temp range

• NSF H1 Registered    
• Excellent low temperature pumpability    
• Wide operating temp range

• NSF H1 Registered    
• Excellent low temperature pumpability    
• Wide operating temp range

• NSF H1 Registered    
• Excellent low temperature pumpability    
• Wide operating temp range

• NSF H1 Registered    
• Excellent low temperature pumpability    
• Wide operating temp range

• 350cst @ 25°C
• NSF H1& H3 Registered    
• Film provides rust, corrosion and tarnish resistance    
• Wide operating temperature range

• Very good sealing properties to keep out water and dirt
• Outstanding resistance to fresh and salt water
• Tenacious and adhesive to increase stayput properties

• Fluid Zinc for anti-wear properties    
• High natural V.I. for stable viscosities throughout a wider operating temperature range    
• High Aniline Points for controlled sealswelling characteristics

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Provide excellent oxidation and thermal stability    
• Provide excellent demulsibility and filterability    
• Anti-wear properties

• Multi-purpose grease that sprays like a fluid    
• Exceptional penetrating qualities    
• Will not run, wash off or dry up

• Approved for Angelus and Zacmi Seamers    
• Water/steam-resistant

• Approved for Angelus and Zacmi Seamers    
• Water/steam-resistant

• Approved for Angelus and Zacmi Seamers    
• Water/steam-resistant

• Resists build-up and residue    
• Excellent lubrication even with excessive moisture

• Excellent emulsifying properties    
• Anti-wear

• Friction-modified for improved fuel economy    
• Protects against sludge and varnish formation    
• Good low temperature pour point

• Non-smoking    
• Contains mico-fine graphite

• NSF H1 Registered    
• USP White Mineral-Oil Based Food Grade Grease    
• Exceptional anti-wear properties

• Resisted breakdown under high temperatures    
• Maintained oil pressure under heavy load conditions    
• Minimized rust and corrosion

• Resisted breakdown under high temperatures    
• Maintained oil pressure under heavy load conditions    
• Minimized rust and corrosion

• Resisted breakdown under high temperatures    
• Maintained oil pressure under heavy load conditions    
• Minimized rust and corrosion

• Resisted breakdown under high temperatures    
• Maintained oil pressure under heavy load conditions    
• Minimized rust and corrosion

• Resisted breakdown under high temperatures    
• Maintained oil pressure under heavy load conditions    
• Minimized rust and corrosion

• Manufactured with 100% PAO synthetic base fluid    
• Outstanding effective lubricating temperature range, -50°F to 450°F    
• Unsurpassed oxidation stability

• Manufactured with 100% PAO synthetic base fluid    
• Outstanding effective lubricating temperature range, -50°F to 450°F    
• Unsurpassed oxidation stability

• Manufactured with 100% PAO synthetic base fluid    
• Outstanding effective lubricating temperature range, -50°F to 450°F    
• Unsurpassed oxidation stability

• Manufactured with 100% PAO synthetic base fluid    
• Outstanding effective lubricating temperature range, -50°F to 450°F    
• Unsurpassed oxidation stability

• Manufactured with 100% PAO synthetic base fluid    
• Outstanding effective lubricating temperature range, -50°F to 450°F    
• Tacky, adhesive. water-resistant
• Paper machine bearings operating in heavy washdown areas
• Bearings operating in heavy washdown areas

• 100% PAO Synthetic Base Fluid    
• Contains 5% Molybdenum Disulfide – Meets the requirements of heavy-duty construction equipment    
• High melting point

• 100% PAO Synthetic Base Fluid    
• Contains 5% Molybdenum Disulfide – Meets the requirements of heavy-duty construction equipment    
• High melting point

• Used to replace straight oils in most operations.
• Increases tool life    
• Excellent corrosion inhibition    
• Excellent finish in machining and grinding operations
• Better cooling than mineral based cutting fluids

• 100% Synthetic    
• For all types of medium to high speed electric motor, fan and pump bearings    
• Anti-wear and extreme pressure additives

• 100% Synthetic    
• For all types of high speed anti-friction bearings    
• Excellent low temperature grease

• Outstanding effective lubricating temperature range, -50°F to 450°F
• Unsurpassed oxidation stability
• Compatibility with most mineral oil-based greases
• Outstanding shear stability. These greases do not thin out when worked in the application

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent lubricity    
• Superior heat transfer characteristics    
• Outstanding water demulsibility

• Excellent thermal stability and oxidation resistant characteristics    
• Outstanding extreme pressure and anti-wear properties    
• Exceptional demulsibility characteristics

• Excellent thermal stability and oxidation resistant characteristics    
• Outstanding extreme pressure and anti-wear properties    
• Exceptional demulsibility characteristics

• Excellent thermal stability and oxidation resistant characteristics    
• Outstanding extreme pressure and anti-wear properties    
• Exceptional demulsibility characteristics

• Excellent thermal stability and oxidation resistant characteristics    
• Outstanding extreme pressure and anti-wear properties    
• Exceptional demulsibility characteristics

• Excellent thermal stability and oxidation resistant characteristics    
• Outstanding extreme pressure and anti-wear properties    
• Exceptional demulsibility characteristics

• 20 drum minimum order

• Low pour point providing excellent extreme cold temperature performance
• Pure formulation providing full compatibility with UHMWPE plastic
• Optimum viscosity for sub-zero conveyor belt/track lubrication
• Excellent option to silicone oils experiencing severe global supply shortages

• NSF H1 Registered    
• Compatible with EPDM rubber and other non-silicone elastomers    
• Resistant to hot water, steam and alkaline solutions

• Excellent high temperature stability and oxidation resistance    
• Very low deposit forming tendencies    
• Outstanding anti-wear protection

• Excellent high temperature stability and oxidation resistance    
• Very low deposit forming tendencies    
• Outstanding anti-wear protection

• Excellent high temperature stability and oxidation resistance    
• Very low deposit forming tendencies    
• Outstanding anti-wear protection

• Excellent high temperature stability and oxidation resistance    
• Very low deposit forming tendencies    
• Outstanding anti-wear protection

• Excellent high temperature stability and oxidation resistance    
• Very low deposit forming tendencies    
• Outstanding anti-wear protection

• Excellent high temperature stability and oxidation resistance    
• Very low deposit forming tendencies    
• Outstanding anti-wear protection

• Wide operating temperature range
• Fewer oil changes
• Lower oil consumption
• Reduces compressor maintenance
• Eliminates lacquering and deposits
• Greatly reduces fire and explosion hazard
• NSF H1 Food Grade Registered No. 160052

• It is biodegradable    
• Excellent thermal and oxidation stability characteristics    
• Non-carbonizing which eliminates harmful deposits

• It is biodegradable    
• Excellent thermal and oxidation stability characteristics    
• Non-carbonizing which eliminates harmful deposits

• NSF H1 Registered Food Grade
• Non-Toxic
• Excellent   performance   on   stainless   steel,   steel,   and aluminum
• Does not contain sulfur, chlorine, or mineral oil
• Provides minimal smoke

• NSF H1 Registered Food Grade
• Non-Toxic & Odorless
• Water Soluble Fluid
• Does Not Contain Sulfur, Chlorine, or Mineral oil
• Dissolves Sugar, Lubricates & Prevents Sugar Buildup
• Reduces Wear & Corrosion
• Multi-Purpose Lubricant

• Recommended water addition of 20% for optimum performance
• NSF H1 Registered Food Grade
• Non-Toxic & Odorless
• Water Soluble Fluid
• Does Not Contain Sulfur, Chlorine, or Mineral oil
• Dissolves Sugar, Lubricates & Prevents Sugar Buildup
• Reduces Wear & Corrosion
• Multi-Purpose Lubricant

• NSF H1 Registered    
• 12 Stages Passed on FZG Four Square Gear Test    
• Outstanding thermal and oxidative stability

• Full Synthetic
• Excellent Resistance to Centrifugal Fluid Separation Provides Long-Term Lubrication
• Superior Extreme Pressure Properties Provides Additional Protection During High Shock Loads and/or Shaft Misalignment
• Excellent Heat Resistance and Oxidative Stability
• Provides High Corrosion Protection in Wet Environments

• High-Performance Synthetic Formulation, works well in all climates
• Helps provide smooth trouble free operation on most types of fishing reels
• Highly water resistant - Includes oxidation inhibitors to prevent gumming
• Provides a long lasting protective film that prevents friction, wear, rust and corrosion
• Clean, white, no-odor, non-staining, non-toxic formulation
• Also ideal for locks, latches, hinges, and tools or anywhere you need a light-bodied grease

• Eliminates carbon build-up on chains    
• Does not contain harmful VOC’s which pollute the atmosphere    
• Advanced ester chemistry reduces friction, wear and energy costs

• Eliminates carbon build-up on chains    
• Does not contain harmful VOC’s which pollute the atmosphere    
• Advanced ester chemistry reduces friction, wear and energy costs

• Excellent thermal stability    
• Outstanding anti-wear properties    
• Exceptional demulsibility characteristics

• Potential for extended drain intervals of +10,000 hours    
• Readily biodegradable (Pw1)    
• Outstanding solvency to keep air compressors clean

• Potential for extended drain intervals of +10,000 hours    
• Readily biodegradable (Pw1)    
• Outstanding solvency to keep air compressors clean

• Potential for extended drain intervals of +10,000 hours    
• Readily biodegradable (Pw1)    
• Outstanding solvency to keep air compressors clean

• Protects parts from seizing and rusting together
• Greatly reduces maintenance meadaches caused by parts rusting together
• Aids in assembly and disassembly of parts
• Highly resistant to saltwater corrosion
• Compatible with all types of metals/most plastics

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• NSF H1 Registered    
• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• Fire resistance    
• Excellent anti-wear performance    
• Biodegradability

• Fire resistance    
• Excellent anti-wear performance    
• Biodegradability

• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
• Delivers lubricant consolidation because of their multi-use capability

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
• Delivers lubricant consolidation because of their multi-use capability

• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
• Delivers excellent anti-wear and extreme pressure protection

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
• Delivers lubricant consolidation because of their multi-use capability

• 100% Synthetic    
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
• Delivers excellent anti-wear and extreme pressure protection

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• Synthetic Grease – NLGI Grade 2
• Excellent Thermoxidative and Hydrolytic Stability
• Operating Temperature Range -20°C(-4°F) to 288°C(550°F)
• Low Volatility and Oil Separation
• Fortified to Protect Ferrous Metals from Rusting
• Extremely inert
• NSF H1 Registered Food Grade

• Designed for applications that primarily operate above 500°F, intermittent up to 700°F
• Excellent Thermo-Oxidative Stability
• Low Volatility
• Excellent Compatibility with Plastics and
• Elastomers
• Chemically Inert Towards Chemicals & Fuels
• Non-Flammable
• Non-Melting Thickener

Check out our Synxtreme HT Max video!

• Synthetic Grease – NLGI Grade 2
• Excellent Thermoxidative and Hydrolytic Stability
• Operating Temperature Range -20°C(-4°F) to 288°C(550°F)
• Low Volatility and Oil Separation
• Fortified to Protect Ferrous Metals from Rusting
• Extremely inert
• NSF H1 Registered Food Grade

• Environmentally responsible    
• Anti-wear, anti-rust    
• Ultimately biodegradable

• All-season    
• Keep transmissions clean

• No additives such as rust inhibitors    
• Optimum lubrication without the formation of carbon deposits

• No additives such as rust inhibitors    
• Optimum lubrication without the formation of carbon deposits

• Extremely water-resistant
• Excellent rust and corrosion protection
• For both plain and anti-friction bearings
   

• Extreme pressure    
• Water-resistant    
• For use on cars, trucks, trailers, off-highway equipment

• Extreme Pressure applications
• Water Resistant
• Heavy-Duty Lubricant with Moly-Disulfide

• Lower maintenance costs    
• Extended oil life

• Lower maintenance costs    
• Extended oil life

• Lower maintenance costs    
• Extended oil life

• Lower maintenance costs    
• Extended oil life

• Lower maintenance costs    
• Extended oil life

• ZINC-free anti-wear properties
• Extreme high viscosity index for excellent fluidity at extreme cold temperatures
• Rust and corrosion resistant properties
• Chemical and mechanical stabilities
• Foam suppression properties
• Good heat transfer properties
• Thermal oxidation stability
• -70°F to -80°F pour point