New Products

• Safe for applications where direct contact with food is possible
• Formulated from pure USP white mineral oil

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals
• Able to flow in very cold ambient temperature applications
• Ultra-clean Fluid. Typical ISO Cleanliness:15/13/9

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals

• Recommended for tight tolerances
• Outstanding heat transfer properties
• Recommended for dual mechanical seals
• Able to flow in very cold ambient temperature applications
• Ultra-clean Fluid. Typical ISO Cleanliness:15/13/9

• Extremely shear stable for extended regreasing intervals    
• Combination of anti-wear and polymer offer extra lubricity thereby reducing heat, frictional drag & power consumption
• Excellent compatibility with seals, gaskets & plastics

• NSF 3H & H1 Registered Food Grade
• Meets U.S. FDA Regulation CFR 172.878
• Approved for Direct & Incidental Food Contact
• Non-Toxic, Odorless and Tasteless
• Allergen Free
• Provides Corrosion Protection

• Superior Anti-Wear Protection increases chain pin and bushing life
• Adhesiveness reduces drippage allowing for the potential extension of relubrication intervals which reduces usage,as well as this unique waterproof tacky product provides increased protection from water and chemical corrosion on all metal surfaces
• Rust and Corrosion Inhibitors enhance the resistance of the chain components to the effects of water and chemical exposure
• NSF H1 Food Grade Registered
• Kosher and other certifications

• Ideally suited for proofer chains
• Water and steam resistant
• Clear, thick and tacky

• Excellent thermal stability and low volatility providing longer service life
• 600°F(316°C) maximum operating temperature
• 650°F(343°C) maximum film temperature
• Low viscosity and pour point for easy start up
• NSF H1, HT1 Food Grade Registered
• Environmentally friendly, non-toxic/non-hazardous

• GC-LB certified
• Lithium Complex thickeners provide high dropping point (500+F)
• Stays in place
• EP & Anti-wear properties
• Excellent shear stability
• Enhanced water and oxidation resistance

• Protects against Wear
• Releases Stuck Parts
• Prevents Rust
• Displaces Moisture

• High Viscosity Base Fluid
• Tacky/Adhesive
• Resistance to the Effects of Steam/Corrosion
• High Temperature Capability
• Excellent Oil Bleed Resistance
• Excellent Anti-Wear and Load Carrying Ability

• High Temperature Lithium Complex Thickener
• Contains XTREMITY AW/EP Additive System
• Prevents Wear, Rust, and Corrosion on Robotic Gears & Bearings Operating in Normal to Severe Loading and Temperature Conditions
• Excellent Flow Across a Wide Operating Temperature Range and Reducer Shaft Speeds
• Shear Stable & Excellent Oxidation Resistance Providing Long Service Life

• Reduces carbon build-up on chains
• No harmful VOC’s which pollute the atmosphere
• Advanced unique chemistry reduces friction, wear and energy costs
• High auto-ignition temperature to reduce the risk of oven fires
• Superior film strength reduces oil consumption and reduces smoke

• Reduces carbon build-up on chains
• No harmful VOC’s which pollute the atmosphere
• Advanced unique chemistry reduces friction, wear and energy costs
• High auto-ignition temperature to reduce the risk of oven fires
• Superior film strength reduces oil consumption and reducessmoke

• Reduces carbon build-up on chains
• No harmful VOC’s which pollute the atmosphere
• Advanced unique chemistry reduces friction, wear and energy costs
• High auto-ignition temperature to reduce the risk of oven fires
• Superior film strength reduces oil consumption and reducessmoke

• NSF H1 Registered    
• Excellent low temperature pumpability    
• Wide operating temp range

• Manufactured with 100% PAO synthetic base fluid    
• Outstanding effective lubricating temperature range, -50°F to 450°F    
• Tacky, adhesive. water-resistant
• Paper machine bearings operating in heavy washdown areas
• Bearings operating in heavy washdown areas

• Used to replace straight oils in most operations.
• Increases tool life    
• Excellent corrosion inhibition    
• Excellent finish in machining and grinding operations
• Better cooling than mineral based cutting fluids

• Outstanding effective lubricating temperature range, -50°F to 450°F
• Unsurpassed oxidation stability
• Compatibility with most mineral oil-based greases
• Outstanding shear stability. These greases do not thin out when worked in the application

• Low pour point providing excellent extreme cold temperature performance
• Pure formulation providing full compatibility with UHMWPE plastic
• Optimum viscosity for sub-zero conveyor belt/track lubrication
• Excellent option to silicone oils experiencing severe global supply shortages

• Wide operating temperature range
• Fewer oil changes
• Lower oil consumption
• Reduces compressor maintenance
• Eliminates lacquering and deposits
• Greatly reduces fire and explosion hazard
• NSF H1 Food Grade Registered No. 160052

• NSF H1 Registered Food Grade
• Non-Toxic
• Excellent   performance   on   stainless   steel,   steel,   and aluminum
• Does not contain sulfur, chlorine, or mineral oil
• Provides minimal smoke

• NSF H1 Registered Food Grade
• Non-Toxic & Odorless
• Water Soluble Fluid
• Does Not Contain Sulfur, Chlorine, or Mineral oil
• Dissolves Sugar, Lubricates & Prevents Sugar Buildup
• Reduces Wear & Corrosion
• Multi-Purpose Lubricant

• Recommended water addition of 20% for optimum performance
• NSF H1 Registered Food Grade
• Non-Toxic & Odorless
• Water Soluble Fluid
• Does Not Contain Sulfur, Chlorine, or Mineral oil
• Dissolves Sugar, Lubricates & Prevents Sugar Buildup
• Reduces Wear & Corrosion
• Multi-Purpose Lubricant

• Full Synthetic
• Excellent Resistance to Centrifugal Fluid Separation Provides Long-Term Lubrication
• Superior Extreme Pressure Properties Provides Additional Protection During High Shock Loads and/or Shaft Misalignment
• Excellent Heat Resistance and Oxidative Stability
• Provides High Corrosion Protection in Wet Environments

• High-Performance Synthetic Formulation, works well in all climates
• Helps provide smooth trouble free operation on most types of fishing reels
• Highly water resistant - Includes oxidation inhibitors to prevent gumming
• Provides a long lasting protective film that prevents friction, wear, rust and corrosion
• Clean, white, no-odor, non-staining, non-toxic formulation
• Also ideal for locks, latches, hinges, and tools or anywhere you need a light-bodied grease

• Protects parts from seizing and rusting together
• Greatly reduces maintenance meadaches caused by parts rusting together
• Aids in assembly and disassembly of parts
• Highly resistant to saltwater corrosion
• Compatible with all types of metals/most plastics

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• High temperature stability
• Mechanical stability – the greases do not readily thin out
• Deliver excellent anti-wear (AW) and extreme pressure (EP) protection
• Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
• Excellent resistance to chemically treated water washdown procedures at high temperatures

• Fire resistance    
• Excellent anti-wear performance    
• Biodegradability

• Synthetic Grease – NLGI Grade 2
• Excellent Thermoxidative and Hydrolytic Stability
• Operating Temperature Range -20°C(-4°F) to 288°C(550°F)
• Low Volatility and Oil Separation
• Fortified to Protect Ferrous Metals from Rusting
• Extremely inert
• NSF H1 Registered Food Grade

• Designed for applications that primarily operate above 500°F, intermittent up to 700°F
• Excellent Thermo-Oxidative Stability
• Low Volatility
• Excellent Compatibility with Plastics and
• Elastomers
• Chemically Inert Towards Chemicals & Fuels
• Non-Flammable
• Non-Melting Thickener

Check out our Synxtreme HT Max video!

• Synthetic Grease – NLGI Grade 2
• Excellent Thermoxidative and Hydrolytic Stability
• Operating Temperature Range -20°C(-4°F) to 288°C(550°F)
• Low Volatility and Oil Separation
• Fortified to Protect Ferrous Metals from Rusting
• Extremely inert
• NSF H1 Registered Food Grade